Nuvite Aluminum Polish
|We have added another brand of polish because the Nuvite products were in short supply and difficult to obtain. That polish is called Bright Work Metal Polish and it's performance is comparable to the Nuvite products. Scroll down to the bottom section of this page to see more info.|
I think we've tried every polish on the market. Rolite, Flitz, Mother's, Maguire's and a host of others. And most of them are quite good. But I don't know of anyone who has tried Nuvite aluminum polish and gone back to what they were using before. The consensus is that it does everything better. That's why it's the only polish we offer. It's a bit expensive but well worth it.
Nuvite comes in 5 grades, from coarse (for rough, oxidized aluminum) to fine (for final finish polishing). Start with a grade that is appropriate for the starting condition of the aluminum. After completely polishing the item with the coarse grade, repeat the process with the fine grade to achieve a smooth, brilliant final polish.
For more detailed information on which grade to use, read the Nuvite Application Guide. Always experiment in an inconspicuous area first. If you are starting a serious polishing project we recommend you first try our sample pack of 1/4 lb. cans which contains one of each of the standard grades and experiment a bit.
A little goes a long way. One pound of the "S" finish grade will be enough to do the average Airstream Trailer. About 1/8 lb will be enough to do the finish polish on a small airplane. However you will use considerably more than this when first polishing oxidized surfaces with one of the coarser grades, but once it the shine is there, it doesn't take much to keep it there.
We have recently added Grade F9 to the product list. This grade is very coarse and very aggressive and has application in severe cases of corrosion or in smoothing out rough mill finishes on new aluminum. When used with the compounding polisher it will blend scratches and remove corrosion much faster than the F7, but it also leave very pronounced swirl marks that will have to be removed with a second compounding with a less aggressive grade of polish, such as F7 or C, before moving on to the Cyclo polisher.
Commercial Polishers: Please inquire about our discounts for volume users. Note that we also stock the Grade 'A' and Grade 'F10' in 1-lb containers.
Nuvite is sold by weight, not volume. The jars will be about 3/4 full.
All prices include shipping. We use Priority Mail for small orders (under 3 lbs) and UPS for larger orders.
Bright Work Metal Polish
Bright Work Metal Polish is a domestically produced product that yields results comparable to the Nuvite products. The polish is less expensive than the Nuvite products because it is sold by volume and not by weight as are the Nuvite products. Each jar is filled to the top rather than 3/4 full as are the Nuvite jars. This means that you get about 20% more product than you would from the same size Nuvite product.
We have tested them side-by-side with the equivalent Nuvite product and found them to perform identically. Click here to view our side-by-side testing (Adobe .pdf file). Nuvite does have a broader range of polishes but the three grades of Bright Work Metal Polish match up with the most popular grades of Nuvite, Grades S, C and F7. It is available in 16 ounce and 8 ounce sizes.
The Bright Work "Blue" matches the Nuvite S. The Bright Work "White" matches the Nuvite C. The Bright Work "Red" matches the Nuvite F7.
Bright Work Metal Polish can be used to polish all types of Aluminum, Chrome, Nickel, Brass, Stainless Steel and other metal surfaces. Bright Work Aviation Metal Polish has been tested to Boeing D6-17487, AirBus Aims09-00-002, AMS1650C, Douglas Aircraft CSD #1, and ASTM F 485 standards and has passed them all.
For more information on this product visit the manufacturer's website at www.brightworkpolish.com
As with the Nuvite products, there is no charge for shipping.